Maytag MLE/MLG23MNA - Manual (Page 28)

28 16022904 Rev. 0 ©2004 Maytag Appliances Company
Troubleshooting Procedures
! WARNING
To avoid risk of electrical shock, personal injury or death, disconnect power to unit before servicing, unless testing
requires power.
Single Dryer Diagnostic Code
d12
Motor Sensed
Problem
Clear diagnostic
code by pushing a
Delicates keypad
for at least 1
second while code
is displayed.
Does
diagnostic code
remain?
False indication
control board
Replace control
board
d9
Voltage Problem
Less Than 90
VAC
Try to clear the
diagnostic code by
pressing the Delicates
keypad for more than 1
second while the code
is displayed.
Exit service mode , and pause for
10 seconds, enter service mode.
Did the
diagnostic code
cancel?
Low voltage was
sensed on the
power line, but is
now ok.
Yes
No
Install reader call distributor to reset control
board. PDA will not reset board.
Check wiring
between debit
card reader
and control
board
Is card reader
installed?
Power down and
up machine to
reset card reader
Replace card
reader or
control board.
No
d16
PR Models Only
Check installation to
insure proper power
going to this dryer. If
d9 persist, check the
wiring or replace the
transformer
Are other machines
at this location giving a d9
diagnostic code?
Check installation
to insure proper
power going to all
of the dryers
If problem persists replace
the control board.
Yes No
Yes
No