Minolta Magicolor 2200 - Manual (Page 10)

Consumable Life Expectancies 2
Consumable Life Expectancies
The stated life expectancy of each consumable is based on printing under specific
operating conditions, such as media type, number of color planes, page size, and page
coverage (@ normal 5% coverage of letter/A4-size media). The actual life expectancy will
vary depending on these and other printing variables, including continuous or intermittent
printing, higher than normal coverage, ambient temperature, and humidity.
Replacing Consumables
Attention
Failure to follow instructions as outlined in the User’s Guide could result in voiding
your warranty.
The following messages indicate that a consumable needs to be replaced:
Item/Message Display This item needs replacing by user after... Page Reference
Fuser oil roller
REPLACE OIL ROLLER
FUSER OIL LOW, FUSER OIL EMPTY, or
REPLACE OIL ROLLER displays in the
message window (after up to 21,000 sin-
gle-sided continuous monochrome or 7,500
continuous color pages, or 7,000 intermittent
monochrome or 5,000 intermittent color
pages). Heavy coverage, intermittent print-
ing, and different media types can use up oil
at an accelerated rate, reducing fuser oil
roller life.
“Replacing the
Fuser Oil Roller”
on page 24
Fuser unit/transfer roller kit
REPLACE FUSER UNIT
100,000 single-sided pages maximum at an
equal mix of black and 4-color pages, all with
5% coverage of each color; however, fuser
unit life is coverage and media dependent). “Replacing the
Fuser Unit and
Transfer Roller
Kit” on page 17
OPC drum kit (OPC drum, laser
lens cover, waste toner pack)
REPLACE OPC DRUM
REPLACE WASTE TONER
WASTE TONER NEAR FULL
Up to 30,000 continuous monochrome or
7,500 continuous four-color pages, or
10,000 intermittent [one-page jobs] mono-
chrome or 5,000 intermittent [one-page jobs]
color pages. Other factors also affect OPC
drum kit component life. “Replacing the
OPC Drum, Laser
Lens Cover, and
Waste Toner
Pack” on page 8