Minolta Magicolor 2200 - Manual (Page 25)

Replacing the Fuser Unit and Transfer Roller Kit 17
Replacing the Fuser Unit and Transfer Roller Kit
WARNING!
The fuser unit is hot. When the top cover is opened, the fuser unit temperature
drops gradually (one hour wait time). Do not replace the fuser oil roller until you
are sure that the fuser unit has cooled down.
When the fuser is worn out, the message “ REPLACE FUSER UNIT ” appears, and the
printer does not print. Replace the fuser kit.
The fuser kit includes the two items below. When replacing the fuser unit, replace the
transfer roller as well.
Replacing the Fuser Unit
1
Turn off the printer.
2
Open the printer’s top cover.
3
Rotate the two fuser oil roller lock levers to
release the fuser oil roller.
Fuser unit Transfer roller unit