Minolta Magicolor 2200 - Manual (Page 29)

Replacing the Fuser Unit and Transfer Roller Kit 21
12
Rotate the two oil roller levers to lock the oil
roller into place.
13
Close the printer’s top cover.
14
Check the status message in the message window.
If a fuser unit alert message is displayed, use the Service/Clear care menu to remove
it. Check the release button to make sure the top cover is properly closed.
Replacing the Transfer Roller Unit


If there is media in the multipurpose tray, remove it. Close the multipurpose tray.
1
Press the right cover release button and care-
fully open the right cover.