Minolta Magicolor 2200 - Manual (Page 46)

Media Types 38
Postcards
Transparencies
Notes

Avoid using labels with exposed adhesive; it may stick to the transfer belt or
the fuser roller, causing labels to peel off and media jams to occur.

Adhesive label stock is supported only in letter or A4 sheets.

A label consists of a face sheet (the printing surface), adhesive, and a carrier
sheet
— The face sheet must follow the plain paper specification.
— The face sheet surface must cover the entire carrier sheet, and no
adhesive should come through on the surface.

You can print continuously with label paper. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous print and print one sheet at a time.

Check your application documentation for other information on
printing labels.
Formatting Format postcard data within your application. Try printing your data on a plain
sheet of paper first to check placement.
Input Multipurpose
Tray Only Up to 50 sheets, depending on the thickness of the postcards
Orientation Face down
Type Use only postcards recommended for laser printers
Weight 16–90 lb (60–163 g/m²)
Duplexing Not supported
Notes If the postcard is warped, press on the warped area before
putting in multipurpose tray.
Formatting Format the information to be printed on the transparencies within your
application. Try printing your data on a plain sheet of paper first to check
placement.