Minolta Magicolor 2200 - Manual (Page 180)

Repacking the Printer 172
4
Replace the original screen covers on the top of the printer.
5
Repack the 5-bin mailbox in its original shipping carton for storage or shipment.


If you’re returning the printer for service, you don’t need to return the 5-bin
mailbox, unless the problem is with the 5-bin mailbox.
Remove the Lower Feeder Unit


If you don’t have a lower feeder unit installed, skip to the next section.
1
Remove the rear bracket securing the lower feeder unit to the printer.
2
Remove the upper media tray.
3
Remove the brackets on the right and left in front that are securing the optional
tray to the printer.
4
Replace the upper media tray.
5
With the help of another person, lift the printer by its carrying grips and carrying
bar, and place the printer on a table.
WARNING!
The printer weighs about 87.1 lb (39.5 kg) without accessories or consumables installed,
and 133.7 lb (60.6 kg) with accessories and consumables installed. Always have two
people to lift and move the printer to avoid back injury. Additional assistance may be
required if lifting the printer above waist-level.