Minolta Magicolor 2200 - Manual (Page 68)

32-bit SuperDriver Setup 60
Different Paper for 1st Page
1st Page
Output Source
Paper Graphic
The paper graphic image changes according to Paper Size, Orientation and Duplex/
Booklet selections, and will display the selected N-up setting.
Purpose Allows you to select the paper source that will be used for the first page of the
document.
Choices Enabled (selected)—The first page of the document will use the paper
source identified in the 1st Page list.
Disabled—All pages of the document use the same paper source.
Default Disabled
Additional
Choices When enabled is selected, the 1st Page list is activated. See “1st Page” in this
section.
Purpose This list allows you to identify the paper source for the first page of the docu-
ment.
Choices Upper Tray
Multipurpose Tray
Optional Tray—Available only on printers with an optional lower feeder unit
installed and the optional tray selected on the Device Options tab.
Default Upper Tray
Notes This list is disabled (grayed-out) if Different Paper for 1st Page is disabled.
Purpose Sets the output bin where printed media is to be delivered.
Choices Upper Tray—The printer will send printed media to the upper output bin.
Mailbin 1-5—The mailbin output bin (mailbin 1-5).
Default Upper Tray
Notes Output Source options are supported only on printers with a 5-bin mailbox
installed and the 5-bin mailbox option selected on the Device Options tab.