Minolta Magicolor 2200 - Manual (Page 34)

Replacing the Transfer Belt 26
9
Turn on the printer.
10
Check the status message in the message window.
If a fuser oil roller alert message is displayed, use the Service/Clear care menu to
remove it.
Replacing the Transfer Belt
When the transfer belt is at its end of life, the message “ REPLACE TRANSFER BELT ”
appears, and the printer does not print. Replace the transfer belt. After the new transfer
belt is installed, printing automatically resumes.
1
Open the printer’s front
cover.
2
Remove the waste toner
pack.
3
Rotate the left transfer
belt lock lever as shown
in the illustration.