Minolta Magicolor 2200 - Manual (Page 22)

Replacing the OPC Drum, Laser Lens Cover, and Waste Toner Pack 14
3
Place the front end of the
laser lens cover into its
installation rail.
4
Carefully insert the laser
lens cover and make sure
it is fully inserted.
Attention
If the laser lens cover is not properly installed, serious damage to the printer
could result.
Installing the New OPC Drum Cartridge
1
Remove the new OPC drum cartridge from its
shipping box.
Attention
Keep the protective sheet on the cartridge. Do not touch the protective sheet on
the photosensitive (green) surface or scratch the surface. This could lower
image quality.
Make sure the transfer belt left release lever is still set to its top position (12
o’clock).