Minolta Magicolor 2200 - Manual (Page 17)

Replacing the OPC Drum, Laser Lens Cover, and Waste Toner Pack 9
 Removing the laser lens cover
 Installing the laser lens cover
 Installing the new OPC drum cartridge
 Installing the new waste toner pack
Removing the Used Waste Toner Pack
When the waste toner pack is nearly full, the message “ WASTE TONER NEAR FULL ”
appears. Prepare to replace the entire OPC drum kit.
1
Turn off the printer.
2
Open the printer’s front cover.
3
Carefully remove the waste toner pack using the
handle.
Keep the waste toner pack upright so the toner
does not spill.