Minolta Magicolor 2200 - Manual (Page 176)

Storing the Printer 168
Storing the Printer
Keep the following in mind when storing the printer for an extended period:
1
Unplug the printer.
2
Remove the OPC drum, the fuser oil roller, and toner cartridges from the printer and
return them to their original packaging. If the original packaging is not available,
protect the toner cartridges from spilling toner, and protect the OPC drum cartridge
from damage and light.
Relocating Your Printer
Occasionally, you may have to move your printer to a different location, either nearby or
to a distant location. To avoid damage to your printer, we advise you to follow the next
instructions very carefully.
1
Turn off the power to your printer.
2
If the printer has a lower feeder unit and/or a 5-bin mailbox, remove them.
3
If you are moving to a distant location, follow the instructions for repacking
the printer.
4
Relocate the printer.
WARNING!
The printer weighs about 87.1 lb (39.5 kg) without accessories or consumables installed, and
133.7 lb (60.6 kg) with accessories and consumables installed. Always have two people to lift
and move the printer to avoid back injury. Additional assistance may be required if lifting
the printer above waist-level.
5
Unpack and set up the printer in its new location.
6
Reinstall the accessories you removed in step 2.
Refer to the Service & Support Guide or www.minolta-qms.com for additional
information.