MITSUBISHI ELECTRIC FX2N - Manual (Page 28)

FX2N-32DP-IF Profibus-DP Interface Unit Advanced Devices 4
4-2
4.1.1 Example of Allocating Device
Figure 4.1: Example of Allocating Device
Note:
In configuring 32DP-IF GSD file, first assign special function blocks, second extension I/O
units/blocks’ input data, and finally extension I/O units/blocks’ output data. The physical
placement of the module does not have to correspond with the GSD file order.
Table 4.2: Example of Allocating Device
Device No. Description
D0 to D3 FX 2N -4AD’s input data (BFM #5 ~ #8)
D4
Lower 8 bits FX 0N -8ER-ES/UL’s X0 ~ X3 (bit 4 ~ 7 not used)
Higher 8 bits FX 2N -16EX-ES/UL’s X10 ~ X17
D5
Lower 8 bits FX 2N -16EX-ES/UL’s X20 ~ X27
Higher 8 bits
These devises area not used.
D6 ~ D99
D100 ~ D103 FX
2N
-4DA’s output data (BFM #1 ~ #4)
D104
Lower 8 bits FX
0N
-8ER-ES/UL’s Y0 ~ Y3 (bit 4 ~ 7 not used)
Higher 8 bits FX 0N -8EYT-ESS/UL’s Y10 ~ Y17
D105 ~ D199 These devices are not used.
FX 2N -
32DP-IF
FX
2N
-4AD
FX 0N -8ER
-ES/UL
FX
2N
-4DA
FX 2N -16EX
-ES/UL
FX 0N -8EYT
-ESS/UL
X0 ~ X3
Y0 ~ Y3 X10 ~ X27
Y10 ~ Y17
Using Ch1 ~ Ch4
(average data)
Using Ch1 ~ Ch4