IBM BladeCenter T Type 8720 - Manual (Page 111)

Note: See Chapter 7, “Parts listing, BladeCenter T Type 8720 and 8730,” on page 107 to determine which
components should be replaced by a field service technician.
Message Action
Power supply x removed Reinstall power supply x.
System over recommended voltage for
+12V
1. Reseat the management module.
2. Reseat the power modules.
3. Replace the power modules.
4. Replace the management module.
System over recommended voltage for
+1.8V
1. Reseat the management module.
2. Replace the management module.
System over recommended voltage for
+2.5V
1. Reseat the management module.
2. Replace the management module.
System over recommended voltage for
+3.3V
1. Reseat the management module.
2. Replace the management module.
System over recommended voltage for
5V
1. Reseat the management module.
2. Replace the management module.
System over recommended voltage for
+5V
1. Reseat the management module.
2. Replace the management module.
System under recommended voltage for
+12V
1. Reseat the management module.
2. Replace the management module.
System under recommended voltage for
+1.8V
1. Reseat the management module.
2. Replace the management module.
System under recommended voltage for
+2.5V
1. Reseat the management module.
2. Replace the management module.
System under recommended voltage for
3.3V
1. Reseat the management module.
2. Replace the management module.
System under recommended voltage for
5V
1. Reseat the management module.
2. Replace the management module.
System is under recommended voltage
for +5V
1. Reseat the management module.
2. Replace the management module.
System running nonredundant power Make sure that power modules 1 and 2 are installed and operating
correctly. If blade servers are installed in bay 5 or higher, make
sure that power modules 3 and 4 are installed and working
correctly.
Blade server error messages
Note: See Chapter 7, “Parts listing, BladeCenter T Type 8720 and 8730,” on page 107 to determine which
components should be replaced by a field service technician.
Message Action
Blade server x was installed Information only. Take action as required.
Blade server x was removed Information only. Take action as required.
Chapter 6. Symptom-to-FRU index 101