Juniper Networks T1600 - Manual (Page 114)

• Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
• Enhanced fine-grained queuing per logical interface. See the Junos OS Class of Service
Configuration Guide for more information about class of service features.
• Packet buffering, Layer 2 parsing
• Local line, remote line, and remote payload loopback testing
• Simple Network Management Protocol (SNMP): OC3 MIB
• Full bit error rate test (BERT)
• Encapsulations:
• Circuit cross-connect (CCC)
• Translational cross-connect (TCC)
• Extended Frame Relay for CCC and TCC
• Flexible Frame Relay
• Frame Relay
• Frame Relay for CCC
• Frame Relay for TCC
• Frame Relay port CCC
• High-Level Data Link Control (HDLC)
• HDLC framing for CCC
• HDLC framing for TCC
• MPLS CCC
• MPLS TCC
• Multilink Frame Relay (MLFR) UNI NNI (MFR FRF.16)
• Point-to-Point Protocol (PPP)
• PPP for CCC
• PPP for TCC
Software features
• Duplex LC/PC connector (Rx and Tx)
• SONET/SDH OC3/STM1 fiber-optic SFP transceivers:
• Multimode (model number: SFP-OC3-SR)
• Intermediate reach (IR-1) (model number: SFP-OC3-IR)
• Long reach (LR-1) (model number: SFP-OC3-LR)
Optical interface specifications—see SONET/SDH OC3/STM1 Optical Interface Specifications
Cables and connectors
One tricolor Status LED per port:
• Off—Not enabled.
• Green—Online with no alarms or failures.
• Yellow—Online with alarms for remote failures.
• Red—Active with a local alarm; router has detected a failure.
LEDs
Copyright © 2013, Juniper Networks, Inc. 114
T1600 Core Router Interface Module Reference