Juniper Networks T1600 - Manual (Page 39)

• Maximum transmission units (MTUs) of up to 9000 bytes
• Dynamic, arbitrary channel configuration
• Subrate and scrambling:
NOTE: Only DS3 interfaces supports subrate and scrambling.
• Digital Link/Quick Eagle
• Kentrox
• Larscom
• ADTRAN
• Verilink (subrate: only port A mode)
NOTE: For DS3 interfaces, Verilink does not function if an IQE interface is paired with an IQ
interface.
• Data service unit (DSU) functionality
• B3ZS line encoding
• Framing: M13, C-bit parity, framed clear channel
• Full bit error rate test (BERT) for DS0, DS1, and DS3
• ANSI T1.403 FDL
• Internal and loop clocking for DS3 and DS1
• DS3 far end alarm and control (FEAC) channel
• Local line, remote line, and remote playback loopback testing for each DS3 and DS1 channels
• Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
• Enhanced fine-grained queuing per logical interface. See the Junos OS Class of Service
Configuration Guide for more information about class of service features.
• Simple Network Management Protocol (SNMP): DS1 MIB, DS3 MIB
• Encapsulations:
• Circuit cross-connect (CCC)
• Translational cross-connect (TCC)
• Extended Frame Relay for CCC and TCC
• Flexible Frame Relay
• Frame Relay
• Frame Relay for CCC
• Frame Relay for TCC
• Frame Relay port CCC
• High-Level Data Link Control (HDLC)
• HDLC framing for CCC
• HDLC framing for TCC
• MPLS CCC
• MPLS TCC
• Multilink Frame Relay (MLFR) UNI NNI (MFR FRF.16)
• Point-to-Point Protocol (PPP)
• PPP for CCC
• PPP for TCC
Software features
• Standard DS3 BNC coaxial cable interfaces Cables and connectors
39 Copyright © 2013, Juniper Networks, Inc.
Channelized DS3/E3 Enhanced IQ (IQE) PIC (T1600 Router)