Juniper Networks T1600 User Manual
Page 132
SONET alarms:
•
Loss of light (LOL)
•
Phase lock loop (PLL)
•
Loss of frame (LOF)
•
Loss of signal (LOS)
•
Severely errored frame (SEF)
•
Alarm indicator signal—line (AIS-L)
•
Alarm indicator signal—path (AIS-P)
•
Loss of pointer (LOP)
•
Bit error rate—signal degrade (BERR-SD)
•
Bit error rate—signal fail (BERR-SF)
•
Remote defect indicator—line (RDI-L)
•
Remote defect indicator—path (RDI-P)
•
Remote error indicator (REI)
•
Unequipped (UNEQ)
•
Payload label mismatch—path (PLM-P)
SDH alarms:
•
Loss of light (LOL)
•
Phase lock loop (PLL)
•
Loss of frame (LOF)
•
Loss of signal (LOS)
•
Severely errored frame (SEF)
•
Multiplex-section alarm indicator signal (MS-AIS)
•
H Path alarm indicator signal (HP-AIS)
•
Loss of pointer (LOP)
•
Bit error rate—signal degrade (BERR-SD)
•
Bit error rate—signal fail (BERR-SF)
•
Multiplex section—far end receive failure (MS-FERF)
•
High order path—far end receive failure (HP-FERF)
•
Remote error indicator (REI)
•
Unequipped (UNEQ)
•
High order path—payload label mismatch - Path (HP-PLM)
Optical diagnostics related alarms:
NOTE:
Transceivers from some vendors do not support these fields.
•
Temperature high/low alarms and warnings
•
Supply voltage high/low alarms and warnings
•
Tx bias current high/low alarms and warnings
•
Tx output power high/low alarms and warnings
•
Rx received power high/low alarms and warnings
Alarms, errors, and
events
Related
Documentation
T1600 PIC Description on page 3
•
•
High Availability Features on page 4
•
T1600 PIC Combination Limitations on page 18
Copyright © 2013, Juniper Networks, Inc.
132
T1600 Core Router Interface Module Reference