Juniper Networks T1600 User Manual
Page 127
You can install any transceiver supported by the PIC. For information about installing and removing.
•
Duplex LC/PC connector (Rx and Tx)
•
SONET/SDH OC48/STM16 fiber-optic SFP transceivers:
•
Short reach (SR-1) (model number: SFP-1OC48-SR)
•
Intermediate reach (IR-1) (model number: SFP-1OC48-IR)
•
Long reach (LR-1) (model number: SFP-1OC48-LR)
Optical interface specifications—see SONET/SDH OC48/STM16 Optical Interface Specifications
NOTE:
To extend the life of the laser, when a PIC is not being actively used with any valid links,
take the PIC offline until you are ready to establish a link to another device. For information about
taking a PIC offline, see the
request chassis pic offline
command in the Junos OS Operational Mode
Commands.
Cables and connectors
One tricolor per port:
•
Off—Not enabled
•
Green—Online with no alarms or failures
•
Yellow—Online with alarms for remote failures
•
Red—Active with a local alarm; router has detected a failure
LEDs
127
Copyright © 2013, Juniper Networks, Inc.
SONET/SDH OC48c/STM16 PIC with SFP (T1600 Router)