Juniper Networks T1600 - Manual (Page 86)

• Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
• Configurable WAN-PHY mode options:
• loopback
• mpls
• path-trace
• trigger
• Virtual Router Redundancy Protocol (VRRP) support
• Hierarchical shaping
• Fine-grained queueing and shaping per logical interface at both ingress and egress
• 802.1q virtual LANs (VLANs)
• VLAN stacking and rewriting
• Channels defined by two stacked VLAN tags
• Multiple tag protocol identifiers (TPID) support
• IP service for nonstandard TPID and stacked VLAN tags
• 802.1p rewrite per channel
• Flexible mapping of channels and scheduler resources at both ingress and egress
• Flexible Ethernet encapsulation
• MAC learning, policing, accounting, and filtering
Software features
• You can install any transceiver supported by the PIC.
• Fiber-optic 10-Gigabit small form-factor pluggable (XFP) transceivers:
• Duplex LC/PC connector (Rx and Tx)
• 10-Gigabit Ethernet XFP transceivers:
• 10GBASE-S (model number: XFP-10G-S)
• 10GBASE-L (model number: XFP-10G-L-OC192-SR1)
• 10GBASE-E (model number: XFP-10G-E-OC192-IR2)
• 10GBASE-Z (model number: XFP-10G-Z-OC192-LR2)
Optical interface specifications—see 10-Gigabit Ethernet 10GBASE Optical Interface
Specifications
Cables and connectors
OK LED, one tricolor:
• Off—PIC is offline and safe to remove from the router.
• Green—PIC is operating normally.
• Yellow—PIC is initializing.
• Red—PIC has an error or failure.
APP LED, one:
• Off—Monitoring application is not running.
• Green—Monitoring application is running under acceptable load.
• Yellow—Monitoring application is overloaded.
Link status LED, one:
• Off—Port is down.
• Green—Port is online. Link is established.
LEDs
Related
Documentation
T1600 PIC Description on page 3 •
Copyright © 2013, Juniper Networks, Inc. 86
T1600 Core Router Interface Module Reference