Juniper Networks T1600 - Manual (Page 145)

Tunnel Services PIC (T1600 Router)
• Junos OS Release 8.5 and later
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility” on page 18 .
Software release
• Power requirement: 0.07 A @ 48 V (3.4 W)
• Model number for Type 1 Tunnel Services PIC: PB-TUNNEL-1
• Model number for Type 2 Tunnel Services PIC: PB-TUNNEL
• Model number for Type 3 Tunnel Services PIC: PC-TUNNEL
Description
• Loopback function that encapsulates and de-encapsulates packets
• OC12/STM4 tunneling bandwidth on Type 1 FPC; OC48/STM16 tunneling bandwidth on Type
2 FPC; OC192/STM64 tunneling bandwidth on Type 3 FPC
Hardware features
For a list of the software features available for services PICs, see the Junos Services Interfaces
Configuration Release 12.3.
• IP-IP unicast tunneling
• GRE unicast tunneling
• PIM sparse mode unicast tunneling
Software features
One tricolor:
• Off—Not enabled
• Green—Online with no alarms or failures
• Yellow—Online with alarms for remote failures
• Red—Active with a local alarm; router has detected a failure
LEDs
Related
Documentation
T1600 PIC Description on page 3 •
• High Availability Features on page 4
• T1600 PIC Combination Limitations on page 18
• T1600 PICs Supported on page 5
145 Copyright © 2013, Juniper Networks, Inc.
Tunnel Services PIC (T1600 Router)