Juniper Networks T1600 - Manual (Page 27)

ATM2 OC3/STM1 IQ PIC (T1600 Router)
• Junos OS Release 8.5 and later (Type 1)
For information on which FPCs support this PIC, see “T1600 PIC/FPC Compatibility” on page 18 .
Software release
• Two OC3 ports
• Power requirement: 0.41 A @ 48 V (20 W)
• Fine-grained queuing per logical interface
• Conforms to ANSI T1.105-1991 and T1E1.2/93-020R1
• ATM and SONET/SDH standards compliant
• Alarm and event counting and detection
• Compatible with well-known ATM switches
• ATM switch ID, which displays the switch IP address and local interface name of the adjacent
Fore ATM switches
• Model number: PB-2OC3-ATM2-MM
Model number: PB-2OC3-STM2-SMIR
Description
• Single 3010 SAR for segmentation and reassembly into 53 byte ATM cells
• High-performance parsing of SONET/SDH frames
• ASIC-based packet segmentation and reassembly (SAR) management and output port queuing
• 64 MB SDRAM memory for ATM SAR
• Packet buffering, Layer 2 parsing
Hardware features
27 Copyright © 2013, Juniper Networks, Inc.
ATM2 OC3/STM1 IQ PIC (T1600 Router)