JVC VR-609 - Manual (Page 25)

-- 25 --
VR-609
3.3 Pan/Tilt Camera Connection and Control
It is possible to control the Pan/Tilt camera.
The Pan/Tilt camera supports RS-485 and is given an ID for parallel connection.
Easy to install from the menu screen and possible to control by using the Jog Shuttle.
3.3.1 The example of connection with TK-C676 or TK-C655
Linked with a power connection, control terminal connection, and video signal output
connection. The following figure is the example of connection with 9 sets of TK-C676 or
TK-C655.
・Camera power connection.
・Control terminal connection (RS-485) : Please use a twisted-pair cable. Connect a
+terminal (TX+) / -terminal (TX-) of this equipment to the RX+ / RX-terminal of a
Pan/Tilt camera. The camera connected at the end should set-up a terminus
(Switch8 : ON).
・Video signal connection (Composite)
Coaxial cable
Control signal cable
AC 24 V
power supply
TK-C676 or
TK-C655
DVR VR-609
MACHINE ID : 1
Switch 8 : OFF
(RX TERM)
Monitor
MACHINE ID : 2
Switch 8 : OFF
(RX TERM)
MACHINE ID : 9
Switch 8 : ON
(RX TERM)
AC 24 V
power supply
AC 24 V
power supply
TK-C676 or
TK-C655
TK-C676 or
TK-C655
Recommended Cameras:
TK-C676 JVC
TK-C655
Model
JVC
Manufacturer