JVC VR-609 - Manual (Page 91)

-- 91 --
VR-609
6. External Backup
6.1.1 Connect with External USB Port
Connect with external USB port after selecting the image in full screen mode. If there is
power on, please turn off the power then connect with USB device.
1) Pause the full screen after playback you want to backup.
2) Press the FREEZE button then FDD backup menu will display.
3) Press the ENTER button for setup.
■ How to Setup
・FDD backup.
6.1 External USB Port
・Backup is done at USB device.
■ The data file which is stored at USB is showed as like ****.dvf.
・Please operate ON this equipment after turning ON a power switch of all peripheral
equipments.
・Please turn OFF a power switch of peripheral equipments after Operating OFF this
equipment.
・Please turn off the power when you connect USB with DVR for the purpose of
avoiding damage.
・If you reset DVR, you have to power off the USB device.
(without USB memory because not have the power switch.)
!
USB1.1 port will allow you to connect to a FDD or USB memory device to record still
images from the DVR.
6.1.2 How to Backup
・ Recorded still image could be viewed from provided Client Software.