JVC VR-609 - Manual (Page 37)

-- 37 --
VR-609
・JOG & SHUTTLE can search by frame in play mode by
using JOG when it is paused ( ll ) and possible to quick
search by an angle of the shuttle.
・At the menu setting, it is possible to move the position
or change the value by using JOG .
・Slow playback can be performed by using JOG during
playback/Reverse playback. It takes a time for a while,
from a SLOW onscreen display "| | | | ► " appear and
then a SLOW PLAYBACK image starts. When you press
twice the PLAY/Reverse Playback button under shifting,
the image changes immediately.
・When in the Pause mode, turn this to enable single
picture playback. When the rotation direction is changed
in the middle of operation, a reaction is overdue or the
recorded picture is skipped. In such a case, please redo
once again.
・When the DVR is in PLAY MODE, the buttons have the
functions indicated above button mark. (REC, stop ( ■ )
/ pause( ll ) / reverse play (◄ )/ pause ( ll )/ play (►))
・When the DVR is in menu mode, the buttons have the
functions indicated below. (EXIT, ENTER)
4.1.5 Menu Setup
・If you press the menu button, you can see the next menu screen. It
can be moved up and down by using Jog. The Menu is selected by
clicking the ENTER button.
・Setup value (symbols, Alphabet Upper case (Capital) letters, lower
case letters, numbers and position) of the menu can be changed by
using X & Y axis /EXIT/ENTER buttons, and INPUT button.
JOG
SHUTTLE
4.1.6 FREEZE
・By pressing the freeze button then pressing the channel buttons(1~9),
the selected screen will display a still image.
・As pressing a Freeze button, changes Freeze LED ON and OFF.
Pressing Camera Selection button (its LED is ON) in the state of
Freeze LED is ON, it displays freeze screen. It is displayed "FZ" on
screen, and blinked the LED of the Camera Selection button. For
canceling, press the blinked Camera Selection button again.