JVC VR-609 User Manual
Page 89
-- 89 --
VR-609
■
/
、
/
、STOP button
・When in the playback mode, playback direction and pause can be performed
using the
/
and
/
buttons.
・During playback, press the
/
buttons for reverse playback and
/
buttons to pause.
・During reverse playback, press the
/
buttons for playback and
/
buttons to pause.
・When playback is paused, press the
/
buttons for reverse playback and
the
/
buttons to resume playback.
・Press the Stop button to return to the playback menu.
■ Backup HDD Search : Search contents of the backup HDD.
■ From The Beginning : Replays images beginning at the start of HDD No.1.
■ Continuously : Starts playback continuously from the stopped position. The PLAY
button can be used as a shortcut key of the "Continuously" button. The PLAYBACK
starts without cursor position.
1) Recorded contents of the Backup HDD are displayed.
2) Checking the Watermark box enables tampered data to be detected. Use
the User button to check/uncheck the box. When tampered data is
detected during playback, "Manipulated" will be displayed at the lower
end of the screen and playback will temporarily pause.
3) You can view recorded contents by using the Jog and ENTER buttons.
(file name : ****.602, ***.603)
■ Backup CD Search : Search contents of the backup CD.
・ Log screen is displayed which records activity triggered by alarm or Motion.
・Searches/Displays the event log of each of the HDDs. Use the Left/Right buttons to
select the HDD accordingly.
・When the event log screen is displayed, playback of logs according to the
recording time can be started by selecting using the Up/Down buttons or jog dial,
followed by pressing the ENTER button. Pressing the Stop button will return to event
log screen.
■ Recording Event List :
1) Recorded contents of the Backup CD are displayed.
2) Checking the Watermark box enables tampered data to be detected. Use
the User button to check/uncheck the box. When tampered data is
detected during playback, "Manipulated" will be displayed at the lower
end of the screen and playback will temporarily pause.
3) You can view recorded contents by using the Jog and ENTER buttons.
(file name : ***.602, ***.603)
!
When the hard disk configuration is changed, search of event logs upon the
change may fail. In this case, logs can be properly displayed by specifying a
date/time later than the date/time of the configuration change.