Remote controller – JVC VR-609 User Manual
Page 93
-- 93 --
VR-609
7. Remote Controller
7.1 Outline
!
For the first step, you need to give an ID for control DVR by one remote controller.
・Press one of INPUT button (1~9) and STOP on DVR at the same time then the
number which you pressed will be the ID. （Able to set-up on the menu. See
5.7.7.8 Remote control setup (P.85))
・If the Camera Selection buttons (1-9) of the remote control is pressed and held, the
remote control LED of the DVR with the corresponding ID will light up while the remote
control LED of the DVR with other IDs will light off. Only the DVR indicated by the
lighted remote control LED is operable. When installing multiple DVRs at a same
location, make sure that only the remote control LED of the DVR to be operated lights
up before operation.
②
①
③
④
⑤
⑥
⑦
⑧
⑨
⑩