Sony STR-DN1010 - Manual (Page 109)

109 GB
D:\NORM'S JOB\SONY HA\SO0087\STR-DN1010_PMRF\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Right
STR-DN1010
4-174-068-12(1)
Ad
v
a
nced Operations
2 Press to return to step 2 in “To
confirm/save Auto Calibration results
when GUI function is turned off” (page
107).
Tip
Depending on the position of the subwoofer, the
measurement results for polarity may vary.
However, there will be no problems even if you
continue to use the receiver with that value.
For details on each sound field type, see
“Enjoying Surround Sound” (page 65).
For details on the tuner function, see “Tuner
Operations” (page 53).
Tuning radio stations
1 Press TUNER repeatedly to select the
FM or AM band.
You can also use INPUT SELECTOR +/–
on the receiver.
2 Press TUNING + or TUNING –.
Press TUNING + to scan from low to high
frequencies, press TUNING – to scan from
high to low frequencies. The receiver stops
scanning whenever a station is received.
Selecting a frequency directly
(Direct Tuning)
1 After selecting the FM or AM band,
press D.TUNING.
2 Press SHIFT, then press numeric
buttons to enter the frequency.
3 Press .
1
Tune in the station that you
want to preset.
For details on the operation, see “Tuning
radio stations” (page 109).
2
Press SHIFT, then press
MEMORY.
“MEM” lights up for a few seconds.
Perform steps 3 and 4 before “MEM”
disappears.
3
Press PRESET + or PRESET –
to select a preset number.
30 FM and 30 AM preset numbers are
available. If “MEM” disappears before
you select the preset number, start again
from step 2.
4
Press ENTER.
If SHIFT indicator is light off before you
press ENTER, press SHIFT.
The station is stored as the selected preset
number.
If “MEM” disappears before you press
ENTER, start again from step 2.
5
Repeat steps 1 to 4 to preset
another station.
Selecting a preset station
1 Press TUNER repeatedly to select the
FM or AM band.
2 Press PRESET + or PRESET –
repeatedly to select the preset station
you want.
You can also press SHIFT, then press
numeric buttons to select the preset station
you want. Then, press
to enter the
selection.
Selecting a sound field type
Listening to the FM/AM radio
Presetting radio stations