S-air function – Sony STR-DN1010 User Manual

Page 126

Advertising
background image

126

GB

D:\NORM'S JOB\SONY HA\SO0087\STR-DN1010_PMRF\GB\GB07ADD_STR-DN1010-CEL.fm

masterpage: Left

STR-DN1010

4-174-068-12(1)

The TV’s remote cannot be used to
control the connected component
when using the Control for HDMI
function.

• Depending on the connected component

and TV, you may need to set up the
component and TV. Refer to the operating
instructions supplied with each component
and TV.

• Change the input of the receiver to the

HDMI input connected to the component.

When the receiver is in standby mode,
there is no image or sound output from
the TV.

• When the receiver is in standby mode,

image and sound are output from the
HDMI component selected the last time
you turned off the receiver. If you are
enjoying other component, play the
component and perform the One-Touch
Play operation, or turn on the receiver to
select the HDMI component you want to
enjoy.

• Make sure “Pass Through” is set to “ON”

in the HDMI Settings menu if you connect
components not compatible with the
“BRAVIA” Sync to the receiver (page 98).

S-AIR connection is not established
(sound transmission is not
established), e.g., the indicator of the
S-AIR sub unit turns off, flashes, or
turns red.

• If you use another S-AIR main unit, place

it more than 26 feet (8 meters) away from
this S-AIR main unit.

• Confirm the S-AIR IDs of the S-AIR main

unit and S-AIR sub unit are the same

(page 77).

• Another S-AIR sub unit is paired to the

S-AIR main unit. Pair the desired S-AIR
sub unit with the S-AIR main unit

(page 78).

• Place the S-AIR main unit and S-AIR sub

unit separately from other wireless
devices.

• Avoid using any other wireless devices.
• The S-AIR sub unit is turned off. Make

sure the AC power cord (mains lead) is
connected and turn on the S-AIR sub unit.

No sound is heard from the S-AIR
receiver.

• Check that the components are connected

to the receiver.

S-AIR function

Advertising