Using the sleep timer, Recording using the receiver, Using the sleep timer recording using the receiver – Sony STR-DN1010 User Manual

Page 52: Recording onto a cd-r

Advertising
background image

52

GB

D:\NORM'S JOB\SONY HA\SO0087\STR-DN1010_PMRF\GB\GB04GET_STR-DN1010-CEL.fm

masterpage: Left

STR-DN1010

4-174-068-12(1)

Using the Sleep Timer

You can set the receiver to turn off
automatically at a specified time.

Press AMP, then press SLEEP
repeatedly while the power is on.

“SLEEP” lights up on the display.
Each time you press the button, the display
changes cyclically as follows:

0:30:00

t 1:00:00 t 1:30:00 t 2:00:00

t OFF

Tip

To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the Sleep
Timer will be canceled.

Recording using the
receiver

You can record from a video/audio component
using the receiver. Refer to the operating
instructions supplied with your recording
component.

You can record onto a CD-R using the
receiver. Refer to the operating instructions
supplied with your CD recorder.

1

Press one of the input buttons
to select the playback
component.

You can also use INPUT SELECTOR +/–

on the receiver.

2

Prepare the playback
component for playing.

For example, tune to the radio station you
want to record (page 53).

3

Prepare the recording
component.

Insert a blank CD-R into the CD recorder
and adjust the recording level.

4

Start recording on the
recording component, then
start playback on the playback
component.

Note

Sound adjustments do not affect the signal output
from the SA-CD/CD/CD-R AUDIO OUT jacks.

SLEEP

AMP

Recording onto a CD-R

Advertising