Sony STR-DN1010 - Manual (Page 101)

101 GB
D:\NORM'S JOB\SONY HA\SO0087\STR-DN1010_PMRF\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Right
STR-DN1010
4-174-068-12(1)
Ad
v
a
nced Operations
Operating without
connecting to a TV
You can operate this receiver using the display
even if you do not use a GUI when a TV is not
connected.
Press GUI MODE repeatedly to
select “MENU OFF”.
When “GUI” is displayed on the display, the
menu is set to display on the TV screen using
a GUI.
1
Press AMP.
2
Press MENU.
3
Press V/v repeatedly to select
the menu you want, then press
or b.
4
Press V/v repeatedly to select
the parameter you want to
adjust, then press
or b.
5
Press V/v repeatedly to select
the setting you want, then
press .
To return to the previous
display
Press B or RETURN/EXIT O.
To exit the menu
Press MENU.
Note
Some parameters and settings may appear dimmed
on the display. This means that they are either
unavailable or fixed and unchangeable.
Using the menu in the display
V/v/B/b,
GUI MODE
MENU
AMP
RETURN/
EXIT O