Performing auto calibration – Sony STR-DN1010 User Manual

Page 40

Advertising
background image

40

GB

D:\NORM'S JOB\SONY HA\SO0087\STR-DN1010_PMRF\GB\GB04GET_STR-DN1010-CEL.fm

masterpage: Left

STR-DN1010

4-174-068-12(1)

1

Press GUI MODE.

After “MENU ON” appears on the
display for a while, “GUI” appears and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.

2

Press

V/v repeatedly to select

“Settings”, then press

or

b.

The Settings menu list appears on the TV
screen.

3

Press

V/v repeatedly to select

“Auto Cal.”, then press

or

b.

4

Press

V/v repeatedly to select

“Auto Cal. Start”, then press

or

b.

5

Press

to select “START”.

6

The measurement starts in five
seconds.

7

Measurement starts.

The measurement process will take
approximately 30 seconds with a test
tone. Wait until the measurement process
completes.

Tips

• Operations other than turning the receiver on or off

are deactivated during the measurement.

• The measurements may not be performed correctly

or Auto Calibration cannot be performed when
special speakers, such as dipole speakers are used.

2: Performing Auto Calibration

V/v/b,

GUI
MODE

MENU

MASTER
VOL +/–/

2

+/–

Input
buttons

?/1

MUTING/

Count Down

Please press enter key

to stop.

5

Auto Calibration

RETURN

CANCEL

Auto Calibration

TONE

T.S.P.

WOOFER

Advertising