Sony STR-DN1010 - Manual (Page 62)

62 GB
D:\NORM'S JOB\SONY HA\SO0087\STR-DN1010_PMRF\GB\GB04GET_STR-DN1010-CEL.fm masterpage: Left
STR-DN1010
4-174-068-12(1)
Restricting access to
specific channels
(Parental Lock)
You can restrict access to certain channels
using your own lock code. The lock code is set
to “0000” as the default.
Change the lock code before you use this
function for the first time. See “To change the
lock code (Lock Code)” (page 62).
1
Select a channel you want to
lock using Category Mode
(page 59) or Direct Tuning
(page 60).
2
Press TOOLS/OPTIONS.
The option menu appears.
3
Press V/v repeatedly to select
“Parental Lock”, then press
or b.
4
Press V/v repeatedly to select
“ON”, then press .
“Enter your 4-digit lock code.” appears.
5
Press SHIFT, then press the
numeric buttons to enter your
4-digit lock code.
“The channel has been locked.” appears
and the Parental Lock is set.
To delete the numbers you have entered,
go back to step 2 by pressing RETURN/
EXIT O, and then repeat the procedure
above from step 2.
To change the lock code (Lock
Code)
1 Select a channel you want to change
the lock code using Category Mode
(page 59) or Direct Tuning (page 60).
2 Press TOOLS/OPTIONS.
The option menu appears.
3 Press V/v repeatedly to select “Lock
Code”, then press .
“Enter your 4-digit lock code.” appears.
4 Press SHIFT, then press the numeric
buttons to enter your 4-digit lock code.
“Enter a new lock code.” appears.
5 Enter a new 4-digit lock code using the
numeric buttons.
“To confirm, enter your new lock code
again.” appears.
6 Reenter the new lock code with the
numeric buttons.
“The lock code has been changed.”
appears.
V/v/b,
TOOLS/
OPTIONS
SHIFT
Numeric
buttons
RETURN/
EXIT O