Sony STR-DN1010 - Manual (Page 97)

97 GB
D:\NORM'S JOB\SONY HA\SO0087\STR-DN1010_PMRF\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Right
STR-DN1010
4-174-068-12(1)
Ad
v
a
nced Operations
Lets you specify the input mode for the digital
signal input to the DIGITAL IN jacks or
HDMI IN jacks.
x AUTO
Automatically switches the input mode
between DTS, Dolby Digital, or PCM.
x PCM
When signals from the DIGITAL IN jack are
selected, PCM signals are given priority (to
prevent interruption when playback starts).
However, when other signals are input, there
may be no sound, depending on the format.
In this case, set this item to “AUTO”.
When signals from the HDMI IN jack are
selected, only PCM signals are output from the
connected player. When signals other than
PCM are received, set this item to “AUTO”.
Notes
• Even when “Dec. Priority” is set to “PCM”, the
sound may be interrupted at the very beginning of
the first track depending on the CD being played
back.
• When playback a DTS CD, set “Dec. Priority” to
“AUTO”.
Video Settings menu
You can make settings for video.
Lets you convert the resolution of analog video
input signals (component video and video) and
output from the HDMI TV OUT jack.
x AUTO
The resolution is set automatically, depending
on the connected TV.
x 480/576p
The resolution is set to 480p/576p. Video
signals are upconverted and output through the
receiver.
x 720p
The resolution is set to 720p. Video signals are
upconverted and output through the receiver.
x 1080i
The resolution is set to 1080i. Video signals
are upconverted and output through the
receiver.
x 1080p
The resolution is set to 1080p. Video signals
are upconverted and output through the
receiver.
Note
If you select a resolution that the connected TV does
not support in “Resolution” menu, the images from
the TV will not be output correctly.
Dec. Priority (Digital audio input
decoding priority)
Resolution (Converting video
signals)