Philips 862478 - Manual (Page 123)

Part 3 Using Support Functions
Troubleshooting 6-13
Other Error
Codes
If an error code occurs that is not listed in the above sections, take the following actions:
514xxx system error
515xxx CO
2
error
Hexadecimal Code Explanation
Step Action
1 Power cycle the monitor.
2 If the error code still displays, take the monitor out of service and contact the
Philips’ Response Center or your local Philips representative for advice on
remedial action.
3 If the monitor powers up and the error code does not reoccur, enter the
Diagnostic Mode and select the Error Code option. Examine the record of the
last 10 error codes and determine if the same error code occurred previously.
4 If the Error Code screen indicates that the same error code has occurred
previously, take the monitor out of service and contact the Philips’ Response
Center or your local Philips representative for advice on remedial action.
5 If the Error Code screen indicates no previous occurrences of this error, the
monitor can be returned to service.