Removing the main pcb module, Removing the main pcb module -12, Removing the main pcb module” on 7-12 – Philips 862478 User Manual
Page 136: Removing the main, Pcb module” on 7-12, Removing the, Main pcb module” on 7-12, Ons in
Advertising
Disassembly Procedures
7-12
Disassembly
Removing the
Main PCB
Module
Step
Action
1
Unscrew the PCB module by loosening the following 3 screws:
2
Gently pull the module towards you.
3
After you have removed the Main PCB module, you should have access to the
CO
2
, SpO
2
, NBP pump, and the Patient Monitoring I/O modules.
Screw #1
Screw #2
Screw #3
SpO
2
Module
Patient
Monitoring
I/O Module
CO
2
Module
NBP Pump
Advertising
This manual is related to the following products: