Philips 862478 - Manual (Page 138)

Disassembly Procedures
7-14 Disassembly
Removing the
SpO
2
Module
After you have removed the Patient Monitoring I/O module from the Main PCB module, you
can remove the SpO
2
module. To do this:
Step Action
1 Remove the 2 screws fastening the SpO2 module to the I/O module.
2 Remove the connector that attaches the SpO
2
module to the I/O module.
3 Gently pull the SpO
2
module away.
Screw #1
Screw #2