Philips 862478 - Manual (Page 26)

Features and Options
1-6 Overview
Rear of
Monitor
The following diagram is of the rear panel. For an explanation of the symbols located on this
panel, see “Explanation of Symbols” on page vi.
The C3 has four connections on its rear panel. The diagram below is of the rear panel. It
shows you how to make the four possible connections (Defib Sync, Equipotential, AC Input,
and RS-232 I/O).
PHILIPS C3 PATIENT MONITOR
Manufactured for Philips for
Philips Medical Systems
3000 Minuteman Road
Andover, MA 01810
Made in U.S.A.
100-230V~
50-60 Hz. 1.0A T1AL 250V T1AL 250V
970085
IPX1
0123
CE
YYYY-XX
100-230V~
50-60 Hz. 1.0A T1AL 250V T1AL 250V
9700859
IPX1
0123
CE
YYYY-XX
A
B D
C
Callout Connector Connector Type Label
A. AC Input 3-line connector IEC 320 receptacle
B. RS-232 I/O DB-9 (male)
C. Equipotential
Grounding Post Equipotential
The equipotential grounding post
may be used by facilities as required
by their procedures.
D. Defib Sync 2.5mm subminiature phone jack
50 - 60Hz
1A
100 - 240V ~