Philips 862478 - Manual (Page 35)

Mounting
Site Preparations 2-7
Mounting
Warning Warning
Make sure that you have read all applicable instructions before attempting to install the
wall mount.
Wall mounts that are intended to support monitors must be capable of supporting 4
times the weight of the monitor when properly installed.
Do not mount any portion of a monitoring instrument over a patient’s bed.
Do not exceed the maximum rated load specified for each wall mount.
Ensure that no electrical wiring, utilities, or piping interfere with the selected wall
mounting location.
The rear panel includes threaded standoffs for attaching a mounting system accessory.
PHILIPS C3 PATIENT MONITOR
Manufactured for Philips for
Philips Medical Systems
3000 Minuteman Road
Andover, MA 01810
100-230V~
50-60 Hz. T1AL 250V T1AL 250V
97008
IPX1
0123
CE
YYYY-XX
Mounting
Standoffs