Philips SFF 6135D - Manual (Page 15)

Initial Operation · Connecting the Telephone Handset 15
EN
Connecting the Telephone
Handset
Connecting the Handset
Plug one end of the spiral cable into the socket on the
telephone handset. Insert the other end into the socket
designated with the
Ó symbol.
Telefonhörer anschließen
Connecting the Telephone
Cable
Connecting the Telephone Cable
Connect the telephone cable to the device by inserting
it in the socket designated with
FAX/Ñ (RJ-11-Connec-
tor). Insert the telephone plug into your PTT line
socket.
Telefonkabel anschließen
Connection to an ISDN system!
PABX Systems 1
Connecting the Mains Cable
Mains Voltage at the Site of Installation
1 Insert the mains cable into the connection located
on the rear side of the device. Plug the power cable
into the electrical outlet.
2 Switch the device on using the on/off switch on the
rear.
CAUTION!
Connection to an ISDN system!
You can not connect your devices directly to
the digital output of the ISDN system. Details
for ISDN connections can be found in the
instructions provided with the terminal
adapter or the dial-up router.
Notice
Connection to Private Automatic
Branch Exchange
If you connect your device as extension to a
telephone system, you must set it for working
as an extension (also see Chapter Telephone
Lines and Additional Devices, page 63).
CAUTION!
Mains Voltage at the Site of Installation!
Check whether the mains voltage of your
device (indicated on the type label) matches
the mains voltage available at the setup loca-
tion.