Philips SFF 6135D - Manual (Page 51)

Networks · Connect WLAN Adapter 51
EN
Connect WLAN Adapter
Connect WLAN Adapter
Insert the WLAN adapter into the USB host port on the
reverse of the device.
USB-Host hinten anschließen
WLAN is Optional
Switching Wireless
Networking (WLAN) On/Off
Introduction
Wireless networking is activated by default. You have
the option of turning this function off.
1 Press
C, 080 and OK.
2 Use
[ to select whether you would like to turn the
function on or off.
3 Confirm with
OK.
Setting up a Wireless
Network (WLAN) Using the
Wizard
Introduction
You can integrate your device very quickly and easily
into an existing wireless network using Wi-Fi Protected
Setup (WPS) or using a wireless network scan. Using
WPS, all important settings like network name (SSID)
are automatically configured and the connection pro-
tected with secure WPA Encryption.
Using Wi-Fi Protected Set-up
(WPS)
WPS
Using Wi-Fi Protected Setup (WPS), you can integrate
your device into an existing wireless network in two dif-
ferent ways very quickly and easily. You can activate the
login with a pin code or using Push Button Configura-
tion (PBC), if your access point (Access Point, Router)
supports this method.
Using WPS with Pin Code
1 Press
C, 0811 and OK.
2 Use
[ to select WPS PIN
.
3 A pin code appears on the display. Enter this pin
code in your access point (Access Point, Router).
4 Press
OK on the device. The WLAN access point
and device connect automatically and create a WPA
protected connection.
Using WPS with Push Button
Configuration (PBC)
1 Press
C, 0811 and OK.
2 Use
[ to select WPS PBC
.
3 Activate Push Button Configuration on the WLAN
access point. The WLAN access point and device
connect automatically and create a WPA protected
connection.
Using Network Scan
Introduction
Your device shows you a list of all available wireless net-
works. A wizard helps you connect with the desired
wireless network.
1 Press
C, 0812 and OK.
2 The available wireless networks are displayed. Use
[ to select the desired wireless network.
3 Confirm with
OK.
4 Select an encryption standard or switch off network
security using
[
5 Confirm with
OK.
6 Enter the password for the network.
7 Confirm with
OK.
8 The device connects with the wireless network and
automatically attempts to obtain an IP address.
Notice
WLAN is Optional
WLAN is optional and functions exclusively
with an original adapter, which you can
acquire from our order service (see Order
Service on the back of this operating manual).
Other wireless adapters can damage the
device.
Notice
WEP Key
With 64-bit encryption, the WEP key must
be either 5 characters (ASCII) or 10 num-
bers (hexadecimal). With 128-bit encryp-
tion, the WEP key must be either 13 char-
acters (ASCII) or 26 numbers (hexadeci-
mal). You can find the WEP key in the
network settings of your PC.
Notice
WPA Key
Enter an 8 to 63 character long password.
The password can contain alphanumerical
characters—numbers and letters—and
any other symbol available on the keypad.
The only invalid character is "€” (the euro
currency symbol).