Philips SFF 6135D - Manual (Page 53)

Networks · Setting Up a Wireless Network (WLAN) Manually 53
EN
Setting Network Security
Unprotected Wireless Networks are Accessible to Others!
1 Press
C, 0822 and OK.
2 Select an encryption standard or switch off network
security using
[
3 Confirm with
OK.
4 Enter the password for the network.
5 Confirm with
OK.
Set IP Address Assignment
Introduction
The IP address assignment allows you to select whether
your device's IP address is assigned dynamically by a
DHCP or BOOTP router/server or statically assigned
by the user. You can enter IP addresses, subnet masks,
gateways or two alternative domain name servers
(DNS) for the configuration of the static network con-
nection.
1 Press
C, 083 and OK.
2 Select automatic or manual configuration using
[.
3 Confirm with
OK.
This Process May Take a Few Moments.
Set Static IP Address Assignment
Available Function (WLAN)
Enter IP Address
Introduction
The IP address is the address of the device in the net-
work. It must not match the IP address of the computer
or other network components, however it must be
located in the IP field.
1 Press
C, 0841 and OK.
2 Enter the IP address (for example 192.168.001.×××).
3 Confirm with
OK.
Entering the Subnet Mask
Introduction
In a network with a gateway or router, the subnet mask
indicates whether the respective data packets are
addressed to an internal recipient in the network or
whether they should be sent to a recipient outside of
the network.
1 Press
C, 0842 and OK.
2 Enter the subnet mask (for example
255.255.255.000).
3 Confirm with
OK.
Enter IP Address of the Access Point (=
Gateway)
1 Press
C, 0843 and OK.
2 Enter the IP address of the access point (Access
Point, Router).
3 Confirm with
OK.
Enter Domain Name Server (DNS)
Introduction
The DNS translates IP addresses in the names of inter-
net pages and vice-a-versa. You can enter a primary and
secondary DNS.
Enter Primary DNS
1 Press
C, 0844 and OK.
2 Enter the address of the primary DNS.
3 Confirm with
OK.
CAUTION!
Unprotected Wireless Networks are
Accessible to Others!
Unprotected Wireless Networks are Accessi-
ble to Others! Always protect your network
against unauthorised access. You can toggle
between different encryption standards.
Notice
WEP Key
With 64-bit encryption, the WEP key must
be either 5 characters (ASCII) or 10 num-
bers (hexadecimal). With 128-bit encryp-
tion, the WEP key must be either 13 char-
acters (ASCII) or 26 numbers (hexadeci-
mal). You can find the WEP key in the
network settings of your PC.
Notice
WPA Key
Enter an 8 to 63 character long password.
The password can contain alphanumerical
characters—numbers and letters—and
any other symbol available on the keypad.
The only invalid character is "€” (the euro
currency symbol).
Notice
This Process May Take a Few Moments.
The automatic configuration of IP address and
subnet mask on the connected network PCs
may take a moment.
Notice
Available Function
This function is only available if you have
selected static IP address assignment with the
function
083.
Notice
IP-Address
The first three blocks of numbers refer to
the IP field; this information must match
the IP address on your computer. The last
three digits determine are the individual IP
address of the device. You can enter any
number between 000 and 255. However,
this number must be unique within the net-
work; it may not be used on any other PC
or network component.