Philips SFF 6135D - Manual (Page 54)

54 Philips · LaserMFD 6135hfd
EN
Enter Secondary DNS
1 Press
C, 0845 and OK.
2 Enter the address of the secondary DNS.
3 Confirm with
OK.
Verify DHCP Settings
Available Function (WLAN)
Introduction
With these functions, you can verify the assigned net-
work settings from your network's DCHP router. You
cannot modify the settings.
Displaying the IP Address
1 Press
C, 0851 and OK.
2 The current IP address is displayed; it is the address
that your device is registered with on the network.
Display Subnet Mask
1 Press
C, 0852 and OK.
2 The subnet mask being used is displayed.
Display IP Address of the Access Point (=
Gateway)
1 Press
C, 0853 and OK.
2 The IP address of the access point (router) is dis-
played.
Display Primary DNS
1 Press
C, 0854 and OK.
2 The primary DNS address is displayed
Display Secondary DNS
1 Press
C, 0855 and OK.
2 The secondary DNS address is displayed
Additional Wireless
Network Settings
Enter the Primary Windows
Internet Name Service (WINS)
Server
Introduction
WINS is a network service that converts the IP address
of the connected network components into NetBIOS
names and vice-versa on the local area network (LAN).
You can enter a primary and secondary WINS server.
1 Press
C, 0861 and OK.
2 Enter the address of the primary WINS server.
3 Confirm with
OK.
Enter the Secondary Windows
Internet Name Service (WINS)
Server
1 Press
C, 0862 and OK.
2 Enter the address of the secondary WINS server.
3 Confirm with
OK.
Enter the First Network Name (=
NetBIOS)
Introduction
The device is registered on the network with the Net-
BIOS name.
1 Press
C, 0863 and OK.
2 Enter the first NetBIOS name.
3 Confirm with
OK.
Enter the Second Network Name
(= NetBIOS)
1 Press
C, 0864 and OK.
2 Enter the second NetBIOS name.
3 Confirm with
OK.
Notice
Available Function
This function is only available if you have
selected automatic IP address assignment with
the function
083.