Philips SFF 6135D - Manual (Page 57)

Settings · Entering Your Telephone Number and Name 57
EN
Entering Your Telephone
Number and Name
Page Header
Your name and number are added together with date,
time and page number at the top edge of each fax trans-
mission (= header).
Entering Name
1 Press
C, 021 and OK.
2 Enter your name. You can enter characters using the
numeric keys (see key labels). Enter special charac-
ters using
0. Press the respective key several
times until the desired character or special character
appears on the display.
3 Confirm with
OK.
Entering Number
1 Press
C, 022 and OK.
2 Enter your number.
3 Confirm with
OK.
Setting the Ring Tones
Selecting the Ring Tone
Selecting the Ring Tone
You can use this function to select the standard ring
tone. You can assign a separate ring tone to entries in
the telephone book (see also chapter on saving an entry,
page 39).
1 Press
C, 054 and OK.
2 Select the desired ring tone using
[.
3 Confirm with
OK.
Adjusting Volume Level
1 Press
C, 055 and OK.
2 Select the desired volume level using
[.
3 Confirm with
OK.
Setting the Number of Rings
Setting the Number of Rings
You can use this function to set the number of rings for
the fax reception mode. After the selected number of
rings, the device switches to fax reception in the fax
mode. Select
0
to switch off the ring tone completely
(see also chapter on silent fax reception , page 59).
1 Press
C, 042 and OK.
2 Select the desired number of rings using
[.
3 Confirm with
OK.
Deactivating the Button
Tones
Deactivating the Button Tones
Every key press is accompanied by a sound. You can
switch off the key tones on your device.
1 Press
C, 007 and OK.
2 Use
[ to select whether you would like to turn the
function on or off.
3 Confirm with
OK.
Configure Paper Settings
Modifying the Basic Settings
Set Paper Weight
1 Press
C, 201 and OK.
2 Using
[ select the weight of the inserted paper.
3 Confirm with
OK.
Set Paper Source
Introduction
You can insert normal printing paper or printed docu-
ments (forms) into the paper tray. You can insert spe-
cial paper formats, envelopes, slides, sheets of labels or
printed documents into the manual paper feed.
1 Press
C, 202 and OK.
2 Using
[ select the paper source.
3 Confirm with
OK.
Spaltenumbruch
Setting the Paper Format
1 Press
C, 203 and OK.
2 Using
[ select whether you would like to configure
the paper format for the paper tray or whether you
would like to use the manual feed.
3 Confirm with
OK.
4 Use
[ to select the desired paper format. Follow
the specifications in the technical data.
5 Confirm with
OK.
Notice
Navigating in the Editor
You can move the cursor using
[. Use C
to delete individual characters.
Notice
Modifying the Basic Settings
The changed settings are stored as new
default settings. If you select a special function
for a one-time process, take care to restore
the default settings or factory settings after
that.