Philips SFF 6135D - Manual (Page 58)

58 Philips · LaserMFD 6135hfd
EN
Set Resolution
Setting the Resolution for
Scanning
1 Press
C, 303 and OK.
2 Select the desired resolution using
[:
DRAFT(100)
—Scanning with reduced resolu-
tion—for use on the Internet, for example
TEXT B&W (300)
—Black and white scan with high
resolution for optical character recognition of text
documents (OCR)
PHOTO(200)
—Scanning with higher resolution -
for photographs, for example
HQ(300)
—Scanning with highest resolution
3 Confirm with
OK.
Set Resolution for Fax
Transmission
1 Press
C, 4013 and OK.
2 Select the desired resolution using
[:
DEFAULT
—For documents without special fea-
tures
FINE
—For texts with small print or drawings
SFINE
—For documents with many details
PHOTO
—For photos
3 Confirm with
OK.
Setting the Resolution for the
Copier
1 Press
C, 103 and OK.
2 Select the desired resolution using
[:
AUTO
—Optimised adjustment for all types of docu-
ments
TEXT
—For texts with small print or drawings
QUALITY
—For documents with many details
PHOTO
—For the highest resolution
3 Confirm with
OK.
Setting the Contrast
Setting the Contrast for the
Scanner
1 Press
C, 304 and OK.
2 Set the desired contrast using
[.
-
/
1
—Reduces the contrast / typeface appears lighter
4
(Factory settings)—Optimized adaptation for all
documents
+
/
7
—Increases the contrast / typeface appears
darker (for example, documents with faint print)
3 Confirm with
OK.
Set the Contrast for Faxes and
Copying
1 Press
C, 104 and OK.
2 Set the desired contrast using
[.
-
/
1
—Reduces the contrast / typeface appears lighter
4
(Factory settings)—Optimized adaptation for all
documents
+
/
7
—Increases the contrast / typeface appears
darker (for example, documents with faint print)
3 Confirm with
OK.
Setting the Brightness
Set the Level of Brightness for
Scanning
1 Press
C, 305 and OK.
2 Using
[, select the desired level of brightness:
-
/
1
—Reproduction is lighter
4
(Factory settings)—Optimized adaptation for all
documents
+
/
7
—Reproduction is darker
3 Confirm with
OK.
Set the Level of Brightness for the
Copier
1 Press
C, 105 and OK.
2 Using
[, select the desired level of brightness:
-
/
1
—Reproduction is lighter
4
(Factory settings)—Optimized adaptation for all
documents
+
/
7
—Reproduction is darker
3 Confirm with
OK.
Additional Scanner Options
Setting the Paper Format
1 Press
C, 306 and OK.
2 Use
[ to select the desired paper format. Follow
the specifications in the technical data.
3 Confirm with
OK.
Select the File Format
Introduction
Using this function, select the file format that should be
used as default for scanning documents.
1 Press
C, 307 and OK.
2 Use
[ to select the desired file format.
3 Confirm with
OK.