Philips SFF 6135D - Manual (Page 22)

22 Philips · LaserMFD 6135hfd
EN
Scan Document and Save to
a Computer
Introduction
Using this function, scan a document with your device
and transfer it onto a computer which is connected
directly to the device using a USB cable.
Start Scanning from Computer
Make Scans Using Standard
Settings
1 Press
SCAN.
2 Use
[ to select SCANTO PC USB
.
3 Confirm with
OK.
4 Press
OK.
Make Scans Using User-defined
Settings
1 Press
SCAN.
2 Use
[ to select SCANTO PC USB
.
3 Confirm with
OK.
4 Use
[ to select SETTINGS
.
5 Confirm with
OK.
6 Using
[, select whether you want to scan the doc-
ument in greyscale or in colour.
7 Confirm with
OK.
8 Enter a name for the file.
You can enter characters using the numeric keys
(see key labels). Enter special characters using
0.
Press the respective key several times until the
desired character or special character appears on
the display.
9 Confirm with
OK.
10 Using
[, select whether you would like to save the
file as an image file or as a PDF file.
11 Confirm with
OK.
12 Select the desired resolution using
f:
DRAFT(100)
—Scanning with reduced resolu-
tion—for use on the Internet, for example
TEXT B&W (300)
—Black and white scan with high
resolution for optical character recognition of text
documents (OCR)
PHOTO(200)
—Scanning with higher resolution -
for photographs, for example
HQ(300)
—Scanning with highest resolution
13 Confirm with
OK.
Notice
Adjust Scanner Cover
The scanner cover is equipped with adjust-
able hinges, allowing you to lay even
thicker documents (e.g. books) in the flat-
bed scanner. Carefully lift the scanner
cover so that it rests as evenly as possibly.
Use clear sheets of plastic when copying
three-dimensional objects (e.g. coins, flow-
ers) to avoid damaging the scanner glass.
CAUTION!
Do Not Press on the Scanner Cover!
Do not press forcefully on the scanner
cover when you scan thicker documents
or three-dimensional items, this could
damage the scanner cover and/or the scan-
ner glass.
Notice
Start Scanning from Computer
Using the Companion Center SFX software,
you can call up the scan on the computer. You
can also start the scanning process from any
other graphics program if it is supported by
the Twain Driver. Select the Twain Scanner
Driver as your scanner.
Notice
Access Function
You can also call the function by pressing
C, 31 and OK.
Notice
Access Function
You can also call the function by pressing
C, 31 and OK.
Notice
Navigating in the Editor
You can move the cursor using
[. Use C
to delete individual characters.
Notice
Select the File Format
For an image file, you can select whether
you would like to save the file in TIFF or
JPEG format (see also chapter on Selecting
File Format, page 58).