Philips SFF 6135D - Manual (Page 63)

Telephone Lines and Additional Devices · Switching Caller Line Identification (CLIP) On/Off 63
EN
14 Telephone Lines and Additional Devices
Switching Caller Line
Identification (CLIP) On/Off
Function is not supported in all countries and networks
(Function is not supported in all countries and
networks)
CLIP Definition
The number of an incoming call appears on the display.
For this function to work, the Calling Line Identification
Presentation (CLIP) must be activated for your tele-
phone line. Enquire with your telephone company.
Caller Line Identification may be associated with a fee.
Setting the Country Correctly
1 Press
C, 057 and OK.
2 Use
[ to select whether you would like to turn the
function on or off.
3 Confirm with
OK.
Selecting the Dialling
Process
Function is not supported in all countries and networks
(Function is not supported in all countries and
networks)
In some countries you can set the dialling mode to pulse
dialling or tone dialling (DTMF tones).
Selecting the Dialling Process
1 Press
C, 053 and OK.
2 Use
[ to select the desired dialling process.
3 Confirm with
OK.
Set up the Public Switch
Telephone Network (PSTN)
Function is not supported in all countries and networks
(Function is not supported in all countries and
networks)
Public Switch Telephone Network (PSTN)
Set up the Public Switch Telephone Network (PSTN)
Your device is automatically adjusted to the telephone
network if you set the country correctly (see also chap-
ter Selecting the Country, page 56). It is possible that fur-
ther settings are required for the Public Switched Tele-
phone Network (PSTN). Ask your retailer or the tech-
nical customer service department.
1 Press
C, 032 and OK.
2 Select the desired setting using
[.
3 Confirm with
OK.
Set up Private Branch
Exchange (PABX)
PABX Systems
Private branch exchanges (PABX) are typical in many
offices and some households. You must dial an outside
line access code in order to get a connection to the
public telephone network (PSTN) from a PABX.
Additional Telephone No Extension
Set up Private Branch Exchange (PABX)
You can set up your device for operation on an exten-
sion, indicate the length of the internal numbers (direct
dial number) and save the code which must be selected
in order to reach the Public Switched Telephone Net-
work (PSTN) (= outside line access code).
Notice
Setting the Country Correctly
If the Caller Line Identification does not work
even though the function is activated for your
telephone line, check if you have set the cor-
rect country (also see Chapter Settings, page
56)
Notice
Selecting the Dialling Process
Only use pulse dialling if tone dialling is not yet
activated for your telephone line.
Notice
Public Switch Telephone Network
(PSTN)
You can use this function to set your device to
connect to the Public Switch Telephone Net-
work (PSTN). To connect to a Private Branch
Exchange (PABX) see also chapter on set up
Private Branch Exchange (PABX) , page 63.
Notice
Additional Telephone No Extension
An additional telephone connected to the
device on a telephone socket is not consid-
ered an extension.