Philips SFF 6135D - Manual (Page 26)

26 Philips · LaserMFD 6135hfd
EN
3 Adjust the length of the paper tray to the printer
paper. Press the lock key on the base of the paper
tray. Slide the rear panel until it snaps into the suita-
ble marking: Legal = LG, A4 = A4, A5 = A5, Letter
= LE, B5 = B5.
4 Separate the paper sheets by fanning them out, then
align them by tapping edge of the stack lightly against
a flat surface. This will prevent several sheets of
paper from being drawn in all at once.
5 Insert the paper into the paper tray. You can load up
to 250 sheets (80¦g/m2).
6 Enclose the paper with the two side paper guides. Be
sure not to enclose it so tightly that it bends.
7 Close the paper tray cover.
Notice
Loading Pre-printed Material
If you would like to print on an input sheet
(for example, forms or stationery), place
the input sheet face down in the paper tray,
with the top of the page towards the front.
CAUTION!
Forms from a Laser Printer!
Forms that have been printed out by a
laser printer are not suitable for further
printing.
Notice
Cover of the Paper Tray
If the cover of the paper tray has become
detached, fasten the lid into the supports
Ensure that the flat side of the cover (with
the inscription) faces upwards.