Nortel Networks M3905 - Manual (Page 41)

Make a call
33
Transfer a call
Use the Transfer feature to redirect a call on your Individual DN (non-ACD) to a
third party.
To use the Transfer feature to direct a
call to a third party:
1. Press the Transfer Key. The other party
is on hold and you receive dial tone.
The LCD indicator light flashes
continuously.
2. Dial the DN number where you are
transferring the call.
3. When you hear the ring or a person
answers, press the Transfer Key to
complete the call transfer.
The LCD indicator goes from steady on to
off.
To go back to the original call, if the
transfer is incomplete:
If the person to whom you transferred the
call is not available: Press the Goodbye
Key and press the
Individual Line (DN) Key
next to the flashing LCD indicator to
reconnect to the original call.
The LCD indicator goes from flashing to a
steady on indicator.
Note: On the Meridian SL-100, press the
Transfer Key, dial the number and press the
Goodbye Key. If you press the transfer Key
the second time, you get a three way
conference.
Trans
Trans
2498