Nortel Networks M3905 - Manual (Page 56)

48
While on an active call
4. Dial the new password.
5. Dial the new password again.
Note 1: This feature is not available on the
Meridian SL-100.
Note 2: You cannot change your
password from a remote set.
While on an active call
Activate Call Charge
With the Call Charge feature, you can create a charge account record and/or
charge a call to an incoming number.
Note 1: On the Meridian SL-100 you enter the billing number.
If an account code is required, the user receives a tone after the telephone number
is dialed. Enter the account code at this prompt. If a user wishes to
voluntarily enter an account code, then flash the switchhook and enter the feature
activation code for account code.
Note 2: The Meridian SL-100 is a central office based PBX, and this feature is not
available.
Charge a call or Charge a Forced call
Call Charge allows you to charge a call to a specific account. Forced Charge
allows you to charge long-distance calls from a telephone restricted to local calls.
Note:
On the Meridian SL-100, the Account code allows a user to enter a
billing number. If the account code is required, the user is prompted to enter a
code by a tone after the telephone number is dialed. If a user wishes to voluntarily
enter an account code, then flash the switchhook and enter the feature code,
which is provided by your system administrator.
To charge a local or long-distance
call to an account before you dial:
or
1. Press the Charge Key or
dial an FFC.
Charge