Nortel Networks M3905 - Manual (Page 65)

Call features
57
2. Dial the number of the party you want
to page. After dialing, you receive a
ringback tone.
Note 1: The person you paged uses any
telephone to enter a Radio Page Answer
code, plus their own DN number. This
action connects you and the person paged.
Note 2: If your call goes unanswered for a
preset time period, you receive a
continuous high pitched tone then silence.
Press the Goodbye Key.
To use Automatic Post selection: The called party is either busy on the
telephone or away from the desk.
To page the called party there is no need to
redial the number of the called party.
1. Press the Radio Page Key. You receive
a special dial tone.
2. Dial the Radio Page Access FFC. You
receive dial tone.
Note 1: The person you have paged can
proceed to any telephone, enter their Radio
Page Answer code plus their own DN
number. This action connects you and the
person paged.
Note 2: You receive a fifteen second, high
pitched tone, then silence, if the party
paged does not answer the call within a
preset time period. When you receive this
signal, replace the handset or press the
Goodbye Key.
To use the Special Radio Page
feature: If you carry a Radio Pager, you receive a
page indication when someone dials your
Directory Number (DN).
If the Radio Page system is telephone up to
function in “Meet - me” mode, you can
RadioPage