Nortel Networks NN10265-111 - Manual (Page 105)

MCS 5100 RTP Media Portal Basics
105 Copyright © Nortel Networks Limited 2006
PPC6-Bug>env
Bug, AST or System environment [B/A/S] = B?
Maximum Memory Usage (Mb, 0=AUTO) = 0?
Field Service Menu Enable [Y/N] = N?
Probe System for Supported I/O Controllers [Y/N] =
Y?
Auto-Initialize of NVRAM Header Enable [Y/N] = Y?
Network PReP-Boot Mode Enable [Y/N] = Y?
SCSI Bus Reset on Debugger Startup [Y/N] = N?
Primary SCSI Bus Negotiations Type [A/S/N] = A?
Primary SCSI Data Bus Width [W/N] = N?
Secondary SCSI Identifier = "07"?
NVRAM Boot List (GEV.fw-boot-path) Boot Enable [Y/N]
= N?
NVRAM Boot List (GEV.fw-boot-path) Boot at power-up
only [Y/N] = N?
NVRAM Boot List (GEV.fw-boot-path) Boot Abort Delay
= 5?
Auto Boot Enable [Y/N] = N?
Auto Boot at power-up only [Y/N] = N?
Auto Boot Scan Enable [Y/N] = Y?
Auto Boot Scan Device Type List =
FDISK/CDROM/TAPE/HDISK/?
Auto Boot Controller LUN = 00?
Auto Boot Device LUN = 00?
Auto Boot Partition Number = 00?
Auto Boot Abort Delay = 7?
Auto Boot Default String [NULL for an empty string]
= ?
ROM Boot Enable [Y/N] = N?
ROM Boot at power-up only [Y/N] = Y?
ROM Boot Abort Delay = 5?
ROM Boot Direct Starting Address = FFF00000?
ROM Boot Direct Ending Address = FFFFFFFC?
Network Auto Boot Enable [Y/N] = Y?
Network Auto Boot at power-up only [Y/N] = N?
Network Auto Boot Controller LUN = 13?
Network Auto Boot Failover Controller LUN = 00?
Network Auto Boot Device LUN = 00?
Network Auto Boot Abort Delay = 5?
Network Auto Boot Configuration Parameters Offset
(NVRAM) = 00001000?
Watchdog prior status ignored at autoboot [Y/N] = Y?
Watchdog shutdown at board reset [Y/N] = N?
Reset Ethernet chip after file transfer [Y/N] = N?
Stop Auto Boot after selftest failure [Y/N] = N?
Memory Size Enable [Y/N] = Y?